| |
Economical replacement bodies for existing
permanent heads currently on the market.
The new E-Series was designed for our customers that are using existing
permanent heads including Everpure, but would like an alternative to the
replacement bodies offered.
The main benefit of the E-Series is price to performance value. E-Series
filters, with equal or superior filtration capability, are offered at a
considerably lower price than comparable replacement bodies on the market.
E-Series replacement bodies we offer are in 10", 12" and 14"
lengths. Bodies are tested to withstand pressure of 125 psi and temperature
of 100° F. Media service life is designed to handle up to 3,000 gallons
in some models and filtration micron ratings are as low as 1 micron in other
models.
Test Information:
The E-Series filter housing and fittings have been tested for performance
under NSF Standard 42. Tests included Hydro Static Testing at 300 psig and
Cycle Testing of 100,000 repetitions from 0 to 150 psig. Complete test results
are available from Omnipure. Omnipure products have been tested and listed
under Standard 42 for taste, odour and chlorine reduction; or particulate
reduction; or have been materials certified. All filters should be installed
on cold water lines only.
NOTE: Activated carbon filters are not intended to be used where
the water is microbiologically unsafe or with water of unknown quality without
adequate disinfection before or after the unit.
|
|
|
|
|
|
|
|
Can be used as a
replacement for:
Everpure H-54, ADC, AC
|
Can be used as a
replacement for:
Everpure H-104, S-101, S-100
VOC #1 & 2, THM #1 & 2
|
Can be used as a
replacement for:
Everpure H-300, H-300M,
H-300HSD, H-1200 (x 2)
|
|
|