We accept
 |
|
| |
Residential > Reverse Osmosis
|
|
| |
WELCOME...you've found the best place to shop for Everpure
Filters. |
ROM II
#9273-85
$495.00 each
In Stock
|
Manufacturer's
Recommended
List Price
$699.99
|
|
The ROM II utilizes the S-101
carbon block pre-filter to reduce chlorine tastes and odors
and other particulate matter in the water. The system’s
Thin Film Composite (TFC) reverse osmosis cartridge then filters
the water down to .00001 microns. This method of filtration
reduces contaminants such as arsenic, lead, copper, sodium,
nitrates, fluoride, cysts and TDS.
The ROM II offers additional features, such as:
* Reduction of lime and scale build-up in appliances that
use water
* More efficient filtering, which requires less frequent
cartridge change
* Fresh water on demand
* A lower operating cost that is below the price of bottled
water
The ROM II also:
* Finely polishes treated water to premium quality for
drinking and cooking.
* Reduces chlorine taste and odor.
* Reduces dirt, rust, asbestos fibers and other particulates
such as oxidized iron, manganese and sulfides.
* Reduces parasitic protozoan cysts such as Giardia, Entamoeba
and Cryptosporidium.
* Controls even extreme levels of common “off”
tastes and odors, including those that are earthy, moldy
and fishy.
* Reduces lead to below the Federal Action Level.
* Is certified by NSF/ANSI in the reduction of arsenic,
barium, cadmium, chromium, copper, fluoride, lead, nitrate/nitrite,
selenium, radium, cysts, sodium and chloroform.
The ROM II features a normal production rate of 14.4 gallons
per day at a 1/2 gallon per minute flow rate.
Replacement cartridges for the ROM 11 are the S-101
and the TFC.
|
|
|
|
ROM III
#9273-86
$559.00 each
In Stock
|
Manufacturer's
Recommended
List Price
$799.99
|
|
The ROM III employs the same water
filtering capabilities as the ROM II, but adds another level
of protection against volatile organic chemicals and MTBE
that may exist in the water. This method of filtration also
reduces contaminants such as arsenic, lead, copper, sodium,
nitrates, fluoride, cysts and TDS.
The ROM III offers additional features, such as:
* Reduction of lime and scale build-up in appliances that
use water
* More efficient filtering, which requires less frequent
cartridge change
* Fresh water on demand
* A lower operating cost that is below the price of bottled
water
The ROM III also:
* Finely polishes treated water to premium quality for
drinking and cooking.
* Reduces chlorine taste and odor.
* Reduces dirt, rust, asbestos fibers and other particulates
such as oxidized iron, manganese and sulfides.
* Reduces parasitic protozoan cysts such as Giardia, Entamoeba
and Cryptosporidium.
* Controls even extreme levels of common “off”
tastes and odors, including those that are earthy, moldy
and fishy.
* Reduces lead to below the Federal Action Level.
* Effectively reduces VOCs, including trihalomethanes (THMs).
* Effectively reduces methyl tertiary-butyl ether (MTBE).
* Inhibits limescale build-up in water-using applications.
* Is certified by NSF/ANSI in the reduction of arsenic,
barium, cadmium, chromium, copper, fluoride, lead, nitrate/nitrite,
selenium, radium, cysts, sodium, MTBE, VOCs and chloroform.
The ROM III features a normal production rate of 14.4 gallons
per day at a .5 gallon per minute flow rate.
Replacement cartridges for the ROM 111 are the
S-101, TFC
and the VOC#1.
|
|
|
|
|
|
|
