A Look At Our Everpure H54 System

Adding a dedicated water filter system to your home is the best way to ensure that you always have crisp and clean drinking water. If you have wanted to install one of our Everpure water filter systems in your home, but you have limited space, the H54 system is one option for you. This compact water filtration system provides the same high-quality filtration and ease of use as other Everpure options, but it only takes up a fraction of the space.

For anyone not familiar with our Everpure systems, these convenient home water filtration systems deliver exceptionally clean water, but they are also extremely low maintenance, making them perfect for long term use. Many homeowners rely on filter pitchers in order to have filtered water on hand, but these pitchers require daily maintenance and monthly filter changes. When you install an Everpure system in your home, you will only need to replace the filter once or twice a year on average. They also will not take up a huge chunk of your fridge space.

The Everpure H54 system mounts directly under your sink and can filter up to 750 gallons of drinking water before it needs to be replaced. That’s the equivalent of 5650 bottles of water, which would cost over $1000 if you bought your water by the case, and over $8000 if you bought individual bottles. Not only are you helping to prevent using all of those single-use plastic bottles, but you will also only be spending a lot less.

These systems not only save money, but they also save space. The H54 system occupies a 5” X 5” X 15” space.

Installing one of these systems under your sink is a quick and easy process. An Everpure system can be installed without any special tools by anyone with some basic tools. Simply mount the filter head, leaving enough room to remove and install filter cartridges, and then follow the instructions to hook up the water tubing to the correct spots. Once everything is hooked up, you simply run the system for a few minutes to purge any air from the system and you are good to go.

You will also need to use a dedicated filtered water faucet with your H54 system. This will require drilling a hole in your sink’s body or countertop to install this faucet. If this is a problem, we also carry systems like the EF1500 that will use your existing faucet’s cold water line to dispense your filtered water.

If you find yourself consuming more water and changing your filter more than once per year, you can always change to a different cartridge style. We offer several Everpure replacement cartridges and most of them can fit the same filter head as the H54, including the 1000 gallon H104. This added 250 gallons capacity also comes with an additional 4 inches of length for the cartridge, meaning you may have to change the height of your filter head.

Luckily the yearly filter replacement process is quick and easy. All you have to do is shut off the valves on your filter head and then replace the filter cartridge, which is about as difficult as replacing a lightbulb. Once this is complete, simply purge the filter system of air like you did when you first installed it and you’re ready to enjoy another year of filtered water.

So if you are ready to enjoy the convenience of having filtered water on tap in your home year-round, check out the H54 and all of the other amazing filter systems we offer here at efilters. If you have any questions about our inventory, feel free to reach out to a member of our team at info@efilters.net so we can help you find the best filter system for your home. Better yet, hop on Live Chat so we can speak to you now.